Planning & layout

Kitchen work triangle planner: check your layout against the planning guidelines

Planning & layout · · Published 2026-11-13 · Updated 2026-11-13

Before you choose cabinets or countertops, it helps to know whether the bones of the layout work. The oldest rule of thumb is the "work triangle" between the three places you move between most — the refrigerator, the sink and the cooktop. This planner takes your own distances and checks each one against the ranges that kitchen planners have used for decades, then flags anything that is too tight or too far.

A kitchen work triangle linking refrigerator, sink and cooktop FridgeSinkCook leg 1leg 2leg 3
The three legs of the work triangle. The planner checks each leg and their total.

The planner

What the planner checks, and why

The work triangle came out of time-and-motion studies at the University of Illinois Small Homes Council in the 1940s and 1950s, and the numbers below are the ones the National Kitchen & Bath Association (NKBA) still publishes in its kitchen planning guidelines.

The triangle is a starting point, not a law. Single-wall and galley kitchens cannot form a real triangle, and many designers now plan by zones — store, prep, wash, cook, serve — laid out in the order you use them, as our note on kitchen ergonomics describes. Islands, second sinks and double ovens also change the picture. Use the result as a prompt for questions, not a verdict.

Reading your result

A green "OK" means the distance sits inside the guideline range. "Tight" means it is usable but at or past the edge — worth a second look if you have the room to change it. "Problem" means it falls outside the range, most often an over-long total or an aisle narrower than a walkway. If several lines come back tight in a small room, that is normal: see small kitchen design for how to make a compact layout work, and kitchen islands for the clearances an island needs. When you are ready to draw it to scale, kitchen design software lists free and paid tools.

Method, sources and licence

Method. You enter distances in centimetres or inches; the tool converts to a common unit and compares each leg, their sum and the aisle width against the fixed thresholds listed above. Metric and imperial thresholds are the rounded equivalents published together in the guidelines (1.2 m / 4 ft, 2.7 m / 9 ft, 7.9 m / 26 ft, 1.07 m / 42 in, 1.22 m / 48 in, 0.91 m / 36 in). Everything runs in your browser; nothing you type is sent anywhere, and the ranges are stated in full above so the page is useful without the tool.

Sources. National Kitchen & Bath Association, Kitchen Planning Guidelines (work triangle and clearances). University of Illinois Small Homes Council–Building Research Council, mid-20th-century kitchen planning studies, from which the triangle and the 26-foot total derive. Wikipedia, “Kitchen work triangle”, for history and the metric figures.

Limits. This is general guidance, not a code requirement and not a substitute for a designer or an accessible-design standard. It does not check appliance door swings, countertop landing areas, outlet spacing or the width needed for a wheelchair turning circle. Local building codes and manufacturers' instructions take precedence.

Published 2026-11-13. En français : le plan de la cuisine et le triangle d'activité.